基于支持向量机的RSA电磁旁路分析方法

针对在旁路分析过程中由于噪声的影响，不能直接观察出RSA的加密过程这一问题，提出结合支持向量机的旁路分析方法，从分类的角度对RSA二进制模幂运算中的平方、乘法操作进行识别，根据密钥与操作的相关性，推断出RSA二进制密钥序列。基于此，对移动设备PCM-9589F凌动主板进行了RSA电磁旁路分析研究，使用串口通信技术实现了对目标设备CPU的旁路电磁信号的采集，并采用基于边界的单类支持向量机的方法，以分类的正确率为70%为阈值，实现了对RSA二进制模幂运算中平方、乘法操作的识别，提取了OpenSSL加密库中1?024位RSA加密算法的二进制密钥序列。相比于传统的简单分析方法，克服了因旁路信号质量低而无法破解密钥的难题。     

新型实用的动态轨道衡过渡装置

本文通过对GDK-800型不断轨无基坑动态轨道称重装置故障成因的探究,提出对其装置的引轨、防爬和过渡部分,进行优化改造的建议,并简介一种新型实用的过渡装置。     

气压仪器检定装置的升级改造

文章针对气压检定装置在使用中存在的一些问题,会同厂家对其进行了升级改造。介绍了改造后的气压检定装置的设计原理、软件和硬件设计以及技术指标等,新装置集成了目前先进的计量设备及技术,编写相应的程序软件升级改造而成。可广泛适用于气象部门空盒气压表、自动站气压传感器以及部分数字压力计的计量检定工作,实现气压检定工作的自动化,提高检定数据的准确性和可靠性,并有效提高检定的工作效率。     

Electrical oscillation generation with current-induced resistivity switching in VO2 micro-channel devices

We report large amplitude modulation waveforms as large as ~ 10 V using vanadium dioxide micro-channel devices operating under current-controlled conditions. The self-sustained electrical oscillations were generated by controlling the applied current in the negative differential resistance region of the investigated devices. An appropriate value of internal capacitance was achieved as parasitic capacitance in the device structure to stabilize the electrical oscillations. This eliminates the need of an external pulsed source or any external passive component connected to the micro-channel devices. Amplitude and frequency of the oscillation were tuned by illuminating the device micro-channel with an external laser. An equivalent circuit model was developed to simulate the waveforms. A good agreement between experiment and simulation was verified.     

智能工作面电液控制装置水处理系统应用分析

为保证智能综放工作面电液控制装置运行稳定和支架等设备的安全运行,采用由过滤器组、软化水装置、储水箱、自动配比装置等组成的水处理系统;该系统对进水进行高精度过滤,并进行酸碱等离子成分处理,保证乳化液的纯净度,维护电液系统及设备运行安全。试验表明,工作面回采过程中未出现电液装置及设备故障,应用效果好。     

Structural and dielectric properties of B2O3/Li2O-added Ba0.6Sr0.4TiO3 multilayer ceramics for tunable devices

B₂O₃ and Li₂O (B/L)-added Ba_0.6Sr_0.4TiO₃ (BST) ceramics sintered at 940 °C exhibited a dense microstructure with large grains. The amount of B/L additive was 4.5 wt% with a B/L ratio of 1.5:1. The B/L-related liquid phase assisted the densification of the BST ceramics. This BST ceramic displayed a large dielectric constant (ε_r) of 2834 with a low dielectric loss (tan δ) of 0.21% at 1.0 MHz. It also displayed a large tunability (28.2% at 10 kV/cm) and a high figure of merit (FOM) of 134. BST thick-films were synthesized using the tape casting method. The thick-film densified at 940 °C exhibited a large tunability of 18.7% at 10.0 kV/cm and an FOM of 208; these are higher than the values reported in the literature. Multilayer ceramics (MLCs) consisting of five layers of 40-μm-thick BST thick-films and Ag electrodes were also fabricated at 940 °C. No diffusion occurred between the Ag electrode and BST thick-film. A large tunability of 67.6% at 52 kV/cm with a high FOM of 294 was obtained from this MLC. This verified that the B/L-added BST ceramic is effective for application in tunable multilayer devices.     

Process-induced variability modeling of subthreshold leakage power considering device stacking

The dominance of leakage currents in circuit design has been impelled by steady downscaling of MOSFET into nanometer regime, and has become a significant component of total IC power dissipation. The issue is further aggravated with the inability to gauge the tolerance of process parameters around their nominal value. Consequently, the drive to improve the static power prediction has enticed accurate and reliable modeling of leakage current, specifically for ultralow power applications. In contrast to gate- and band-to-band-tunneling leakages, subthreshold leakage exhibits high susceptibility to process variations and hence has been considered for variability modeling. Fluctuations in the device electrical and geometry parameters result in a wider distribution of subthreshold leakage current. Hence, taking into account stacking effect, an analytical variability model to estimate subthreshold leakage power in subthreshold circuits, in the presence of threshold voltage variations is proposed. Further, the impact of threshold voltage variability on subthreshold leakage power is modeled in conjunction with simultaneous variations in gate length and width. The leakage power variability is characterized by model-generated distributions obtained using Monte Carlo analysis and validated against SPICE simulations. The proposed model is about 700 computationally faster than SPICE simulations with mean error being less than 0.19%.     

煤田地震勘探中多井组合爆炸法浅析

地震勘探中炸药作为激发震源的激发条件多样,采用有效的震源激发方式,才能取得高信噪比的地震原始数据。本文依据有关爆破原理,理论结合实践经验,提出在厚黄土区采用多井组合的激发方式,能有效压制噪声,增强性噪比,提高数据质量。     

无极绳绞车运输系统及其综合保护装置研究

为了确保煤矿安全运输，研究了无极绳绞车运输系统及其综合保护装置，根据工作面通风系统及巷道布置情况，对无极绳绞车进行了选型，研究了无极绳绞车运输系统的组成和主要功能，主要具有控制功能、保护功能、显示功能、语音提示功能、应急运行功能、存储记忆功能、图形编辑功能、通信及急停功能，然后分析了无极绳绞车运输的综合保护装置。研究为类似工程条件下无极绳绞车运输系统设计提供了技术支持。     

煤矿局部通风机风筒保护装置设计应用

为了提高掘进巷道通风稳定性,降低局部通风机风筒损坏率及漏风系数,提高风筒使用寿命,潞安集团司马煤业公司通风队通过技术分析设计了一套风筒保护装置,该装置提高了风筒使用寿命,降低了风筒漏风量,避免了掘进巷道风量不足现象,取得了显著应用成效。